DELTA 15-262 15 Inch 6 Speed Drill Press w/Production Table Single Phase w/Magnetic Starter Review

If you are looking for a good product, the DELTA 15-262 15 Inch 6 Speed Drill Press w/Production Table Single Phase w/Magnetic Starter is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
• Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
• Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
• Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
• Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

DELTA 15-262 15 Inch 6 Speed Drill Press w/Production Table Single Phase w/Magnetic Starter

PP905 Static Pressure Sensor Review

If you are looking for a good product, the PP905 Static Pressure Sensor is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Honeywell Product PP905B1008

PP905B1008, Honeywell, Inc., PP905 Static Pressure Sensor

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

PP905 Static Pressure Sensor

Jet 354041 J-A4008M-PF4, 26 in. Gear Head Drill with Powerfeed Review

If you are looking for a good product, the Jet 354041 J-A4008M-PF4, 26 in. Gear Head Drill with Powerfeed is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Helical gears for smooth, quiet operation
• Quick release drill ejector
• English/Metric depth gauge
• Machined, T-Slotted base plate
• Head and table rotate 360 degrees around column

Includes J-A4008M-PF4, 26-in Gear Head Drill with Powerfeed - 354041

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Jet 354041 J-A4008M-PF4, 26 in. Gear Head Drill with Powerfeed

Jancy Slugger JB2000PR600 Bender Pressure and Form Die, 2" Pipe Diameter, 6" Center Line Radius Review

If you are looking for a good product, the Jancy Slugger JB2000PR600 Bender Pressure and Form Die, 2" Pipe Diameter, 6" Center Line Radius is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Slugger bender pressure and form die
• 2-inches pipe diameter
• 6-inches center line radius

Jancy Engineering Slugger bender pressure and form die. 2-inches pipe diameter. 6-inches center line radius.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Jancy Slugger JB2000PR600 Bender Pressure and Form Die, 2" Pipe Diameter, 6" Center Line Radius

Hein-Werner AP25 Blue Arbor Plate - 25 Ton Capacity Review

If you are looking for a good product, the Hein-Werner AP25 Blue Arbor Plate - 25 Ton Capacity is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Made in the USA
• Heavy duty steel construction
• Sold in pairs only

Arbor plates for a 25 tons Hein-Werner shop press.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Hein-Werner AP25 Blue Arbor Plate - 25 Ton Capacity

Rebuild Kit, for 3UK37 Review

If you are looking for a good product, the Rebuild Kit, for 3UK37 is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Rebuild Kit
• For Use With G3284355
• AP Unit Kit 1-1/4 - 8290
• Includes Valve Body Seal
• Disc Packing

Rebuild Kit, For Use With 3UK37, AP Unit Kit 1-1/4 - 8290, Includes Valve Body Seal, Disc Packing, Washer Disc Packing Retainer, Locknut, Package Quantity 1 Valve Rebuild KitsReplacement parts for Asco solenoid valves. For a complete list of kit contents, see DrillSpot.com .

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Rebuild Kit, for 3UK37

MBM FMM3 Paper Drill Review

If you are looking for a good product, the MBM FMM3 Paper Drill is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Easily adjustable head design and easy-glide table moves on bearings
• 2" drilling capacity with 3 high quality, 1/4" bits included
• Measuring scale on table with bit sharpener with solid carbide head included
• Rugged mechanical lift table smoothly traverses in either direction
• Offering smart and affordable print finishing solutions

Overview The MBM FMM3 paper drill is designed with a 14 transversing table for easy multi-hole drilling. This high performance floor model comes with three spindles to easily drill three 14 holes and has two moveable heads for accurate alignment. The MBM FMM3 paper drill has six stop collars to keep the material from slipping. The MBM FMM3 paper drill is equipped with a drill bit sharpener with a solid carbide cutting head for precision. Additional bit sizes available.Features Benefits 2 inch drilling capacity easily adjustable head design easy-glide table moves on bearings measuring scale on table accommodates 18 to 12 inch drill bits 3 high quality 14 inch bits included bit sharpener with solid carbide head includedSpecifications Drilling capacity 2 Max. throat depth 3 34 Max. paper length 32 Table size 32 x 15 Motor .75 hp Power supply 115 V 60 Hz Dimensions D x W x H 15 x 32 x 52 Shipping weight 292 lbs. Resources Warranty Information User Manual Data Sheet

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

MBM FMM3 Paper Drill

2MT Taper Shank Jacobs Taper Chuck Arbor Size: #3 Review

If you are looking for a good product, the 2MT Taper Shank Jacobs Taper Chuck Arbor Size: #3 is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

DEWA0203 Size: #3 Features: -Taper chuck arbor.-Morse taper 2MT. Dimensions: -Product weight: 1 lbs.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

2MT Taper Shank Jacobs Taper Chuck Arbor Size: #3

Drill Press Visorguard Kit Review

If you are looking for a good product, the Drill Press Visorguard Kit is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

Drill Press Visorguard Kit. Provides Operator Protection From Chips And Broken Drillson Drill Presses And Drilling Equipment. Easy Grab Handle Flexbar Arm Permits Setting On Visorguard At The Correct Height And Angle For Each Setup. Mounts On Most Machines In Minutes. All Mounting Brackets Included. Shield Size 6" Wide X 6" High With 4" Sides.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Drill Press Visorguard Kit

Freud 6010R 10 mm Boring Machine Chuck for Nottmeyer Machines Review

If you are looking for a good product, the Freud 6010R 10 mm Boring Machine Chuck for Nottmeyer Machines is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Thick micrograin carbide tips
• Right hand rotation
• High production industrial grade
• Precision machined for best results
• Covered by Freud's limited lifetime warranty

Chuck R

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Freud 6010R 10 mm Boring Machine Chuck for Nottmeyer Machines

JET Floor Drill Press - 3/4 HP, 5/8in. Chuck Size, 16 Speed Review

If you are looking for a good product, the JET Floor Drill Press - 3/4 HP, 5/8in. Chuck Size, 16 Speed is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Stroke/Spindle: 4 3/8in./MT2 spindle
• Table Adjust: Rack & Pinion, Tilting
• Footprint: 14 5/8in. x 24 1/2in. base

Industrial drill press features durable electric motor, cast table, 3-way handles for maximum control and heavy cast bases for stability. Drilling Capacity (in.): 5/8, Volts: 115, Swing: 16 1/2in., Vertical Stroke: 4 3/8in., Max. Spindle Distance (in.): 29 1/8, Speeds (qty.): 16, Dimensions L x W x H (in.): 30 x 14 7/16 x 68 7/16, Worktable L x W (in.): 13 3/4 x 13 3/4, Speed (RPM): 200-3,630, Chuck Size (in.): 5/8, HP: 3/4, Stand Included: Floor model

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

JET Floor Drill Press - 3/4 HP, 5/8in. Chuck Size, 16 Speed

Amico 19" Drill Press Quill Feed Return Coil Spring Assembly 2 1/2" Review

If you are looking for a good product, the Amico 19" Drill Press Quill Feed Return Coil Spring Assembly 2 1/2" is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Product Name : Drill Press Spring;Fit for : 19" Drill Presses
• Total Size : 6.3 x 1.8cm / 2.5" x 0.7"(Max.D*T);Color : See the Picture
• Material : Metal
• Net Weight : 171g
• Package Content : 1 x Drill Press Spring

The drill press quill return spring is good replacement for many existing quill spring on 19" drill presses, this is the chrome housed spring that returns the quill to the top after you have completed drilling. Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, safety belt coil spring.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Amico 19" Drill Press Quill Feed Return Coil Spring Assembly 2 1/2"

TTC Power Table Feed - Model .: 199-1051 X-Axis Speed: 4-180 RPM TABLE FEED: Bridgeport Review

If you are looking for a good product, the TTC Power Table Feed - Model .: 199-1051 X-Axis Speed: 4-180 RPM TABLE FEED: Bridgeport is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Reversible. Auto shut-off at end of cut.
• 150 lbs. of torque. Motor: 110V, 60Hz
• Limit switch for sensitive stop.
• Increases productivity.
• No more hand cranking. No loss of dial or hand crank.

Produce more parts without the continual drudgery of having to hand-crank your mill. Variable speed control allows the operator to select the right speed for the selected cut. Controlled feed rate increases cutting tool life and provides superior finish.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

TTC Power Table Feed - Model .: 199-1051 X-Axis Speed: 4-180 RPM TABLE FEED: Bridgeport

Metabo MAG32 1-1/4-Inch Electromagnetic Drill Press Review

If you are looking for a good product, the Metabo MAG32 1-1/4-Inch Electromagnetic Drill Press is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Max torque: 443-Inch-Pound, no-load speed: 700
• Capacity with annular cutter: 1-1/4-Inch
• Max drill depth: 2-Inch
• Bit retention: Weldon 3/4-Inch
• Amps: 9.0

The compact MAG 32 is designed for core drilling tasks up to 32mm and conventional drilling up to 13mm in diameter and is ideal for mobile use. The MAG 32 with its 1,010 Watt motor and 450 revolutions per minute is one of the most powerful machines in its performance class. The usually large hub area of 160mm means that large tools, for example, spiral drills can also be used. Metabo supplies the drill with the current 3/4 -Inch or 19mm Weldon chuck. This can be used to directly accommodate HSS and carbide drills. Thanks to the various adapters, it can also use core drills from other manufacturers as well as current chucks for conventional drill bits.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Metabo MAG32 1-1/4-Inch Electromagnetic Drill Press

JET AP-5 5 Ton Arbor Press Review

If you are looking for a good product, the JET AP-5 5 Ton Arbor Press is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• ARBOR PRESSES
• For all production and assembly applications
• Precision cut steel rams and pinions for accurate operation
• Tables and slotted table-plates are flat and parallel to provide accurate support

Hand Tools

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

JET AP-5 5 Ton Arbor Press

JET Floor-Mount Drill Press - 16-Speed, 3/4 HP, Model# JDP-15MF Review

If you are looking for a good product, the JET Floor-Mount Drill Press - 16-Speed, 3/4 HP, Model# JDP-15MF is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• 16 speeds lets you choose the best speed for the job
• Quick release crank operated worktable height adjustment rotates ± 45deg for versatility
• Hinged metal belt and pulley cover provides easy access to the quick adjustment motor mount to allow rapid spindle speed changes
• X pattern mounting grooves in table allow mounting a fence when table is in reverse position
• Depth stop displays inch/mm and has a quick set bolt for fast, accurate adjustments

The JET 15in. Floor Mount Drill Press provides 16 spindle speeds to match the speed to the job, from 200 to 3630 RPM. Versatile work table adjusts for height and tilts, too. Spindle speeds can be changed quickly and easily for high productivity. Volts: 115, Dimensions L x W x H (in.): 31 x 13 x 63, Drilling Capacity (in.): 5/8, HP: 3/4, Chuck Size (in.): 5/8, Max. Spindle Distance (in.): 29, Speed (RPM): 200-3,360, Speeds (qty.): 16, Stand Included: Yes, Worktable L x W (in.): 16 1/2 x 13, Swing: 15

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

JET Floor-Mount Drill Press - 16-Speed, 3/4 HP, Model# JDP-15MF

Bon 84-472 Field and Garden Hoe with 54-Inch Handle Review

If you are looking for a good product, the Bon 84-472 Field and Garden Hoe with 54-Inch Handle is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• 6-1/4-Inch by 4-3/4-Inch blade size
• 54-Inch ash wood handle
• Replacement handle sold separately 84-709

Bon's field and garden hoe has a welded shank and blade for extra strength. Comes complete with a 54-Inch ash wood handle with steel ferrule.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Bon 84-472 Field and Garden Hoe with 54-Inch Handle

SEPTLS68351101 - Twin-Task Parts Accessories Review

If you are looking for a good product, the SEPTLS68351101 - Twin-Task Parts Accessories is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Used With - Twin-Task 2D Flashlights
• Type - Bulb
• Voltage - 3.60 V
• For Model - 51001, 51011
• Bulb Type - Xenon

Twin-Task Parts Accessories

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

SEPTLS68351101 - Twin-Task Parts Accessories

Milwaukee 4292-1 11.5 Amp 1 1/4-Inch Motor for Electromagnetic Drill Press with No. 3 Morse Taper Review

If you are looking for a good product, the Milwaukee 4292-1 11.5 Amp 1 1/4-Inch Motor for Electromagnetic Drill Press with No. 3 Morse Taper is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• 1-1/4 inch capacity, 11.5 amp motor, 750/375 RPM
• Dual mount gear case/reverse mount for tight quarter drilling
• Taps up to 1-inch/14 threaded hole
• Develops up to 1600 pounds of drill point pressure with a 1-inch steel plate
• Limited warranty, 30-day no-risk trial

1-1/4" Drill Press Motor This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4292-1 features an 11.5 amp motor with a #3 Morris taper chuck. This two speed unit has 375 and 750 rpm, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is to large. Features: 120 AC Volts 11.5 AMPs 1-1/4 Drill Capacity 375 to 750 Maximum RPM 1" Tap Capacity #3MT Comes Standard Includes #3 MT Motor for Electromagnetic Drill Press 5 Year Warranty Since its founding in 1924, Milwaukee has focused on a single vision: To produce the best heavy-duty electric power tools and accessories available to the professional user. Today, the Milwaukee name stands for the highest quality, durable and reliable professional tools money can buy.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Milwaukee 4292-1 11.5 Amp 1 1/4-Inch Motor for Electromagnetic Drill Press with No. 3 Morse Taper

JET HP-5A 5 Ton Hydraulic Press Review

If you are looking for a good product, the JET HP-5A 5 Ton Hydraulic Press is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• HYDRAULIC SHOP PRESSES
• For pressing, bending and straightening operations
• Easy-to-use, hand-operated with pressure gauge for direct pressure readings
• Tables raise and lower easily with use of hand crank on the 15-, 35- and 60-ton models
• Side frames are open for inserting long material

Includes 5-Ton Hydraulic Shop Press - 331406, (2) Bed Plates & Pump Handles, Auxiliary Handle Press - HP-60

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

JET HP-5A 5 Ton Hydraulic Press

Honeywell SPRD10 Static Pressure Zone Damper Review

If you are looking for a good product, the Honeywell SPRD10 Static Pressure Zone Damper is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Static Pressure Regulating

SPRD10, Honeywell, Inc., 10" Diameter Static Pressure Regulating Damper

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Honeywell SPRD10 Static Pressure Zone Damper

Bon 15-351 Eyelag Driver Drill Bit Review

If you are looking for a good product, the Bon 15-351 Eyelag Driver Drill Bit is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Easy to hold
• Attaches to any variable speed drill
• Speed up ceiling installation

Designed to screw eyelag screws into ceilings and attach wire. Eyelag screwdriver attaches to any variable speed drill for fast screw installation.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Bon 15-351 Eyelag Driver Drill Bit

VS-SL5 5" Slotted Drill Press Vise Review

If you are looking for a good product, the VS-SL5 5" Slotted Drill Press Vise is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Jaw Width: 5"
• Opens: 4"
• Vise Width: 7-3/4"
• Vise Length: 7-5/8"

Low Profile. Slotted for easy mounting to table.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

VS-SL5 5" Slotted Drill Press Vise

Annular Cutter & Magnetic Drill Accessories - Unibor <font size=1>(Coolant / Arbors / Drill Chucks) </font size=1> Model No.: UP 252, MT2 Chuch Adapter Review

If you are looking for a good product, the Annular Cutter & Magnetic Drill Accessories - Unibor <font size=1>(Coolant / Arbors / Drill Chucks) </font size=1> Model No.: UP 252, MT2 Chuch Adapter is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

UNIBOR Portable Magnetic Drills

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Annular Cutter & Magnetic Drill Accessories - Unibor <font size=1>(Coolant / Arbors / Drill Chucks) </font size=1> Model No.: UP 252, MT2 Chuch Adapter

FIELDPIECE DUAL PRESSURE Review

If you are looking for a good product, the FIELDPIECE DUAL PRESSURE is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

SDMN5, FIELDPIECE DUAL PRESSURE, Fieldpiece Instruments

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

FIELDPIECE DUAL PRESSURE

Hougen HMD904C 115-Volt Coolant Magnetic Drill Review

If you are looking for a good product, the Hougen HMD904C 115-Volt Coolant Magnetic Drill is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Uses a 16 ounce gravity fed coolant bottle with a spring ejected arbor
• The perfect drill for vertical repetitive homemaking
• Lift detector safety system
• Rear mounted controls
• Positive slug ejection

Hougen Beginning in November 2006, the family of HMD904 style drills will be assembled with a new hex drive spindle mounting system that allows for faster and easier changeout of drill arbors and accessories. The threaded motor spindle has been replaced with a male hex that mates to the new drill arbor, and is held in place by two set screws. To disengage the arbor, loosen the set screws and pull the arbor away from the motor spindle. It's as easy as that! Ask for Spindle Mount #HOU05536 and Chuck #48-66-1381. Lightweight, just 27.5 lbs. It has a new, more powerful motor so you can drill large holes without stalling deep in the cut. New Ergonomic Feed handles can be easily switched to either side. Carrying case, safety chain and hex wrenches are standard. 115V, 60Hz, 8.0 amp. No Load RPM 450. Hole capacity 7/16"- 1-1/2" diameter, 2" depth. Uses 12,000 Series Cutters.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Hougen HMD904C 115-Volt Coolant Magnetic Drill

Craftsman 089140301167 Drill Press Handle Recoil Assembly Review

If you are looking for a good product, the Craftsman 089140301167 Drill Press Handle Recoil Assembly is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Handle recoil assembly is used on drill press
• Fits Craftsman model 315.219140 and multiple Craftsman models
• 5-Inch long, 5-Inch wide, and 2-Inch high
• Package weight of this item is 2-Pound

Craftsman 089140301167 Drill Press Handle Recoil Assembly. Handle recoil assembly is used on drill press. Fits Craftsman model 315.219140 and multiple Craftsman models. 5-Inch long, 5-Inch wide, and 2-Inch high. Package weight of this item is 2-Pound. Craftsman - America's Most Trusted Tool Brand - is characterized by durability, innovation and consistency. From hand tools to power tools and from lawn & garden equipment to tool chests and other storage solutions, Craftsman products are built to last and designed to give you the confidence to complete any project no matter the size.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Craftsman 089140301167 Drill Press Handle Recoil Assembly

1200 Watt Magnetic Drill Press 570RPM @ 1300N Review

If you are looking for a good product, the 1200 Watt Magnetic Drill Press 570RPM @ 1300N is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Magnetic Adhension: 1300N"; No Load Speed: 570 RPM
• Motor Data: 1200 Watt / 110V / 60Hz / AC
• Drilling Capacity: 7/16" to 1-1/2"; Drilling Depth: 2"
• ¾" Weldon Shank
• Included: Carrying Case

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

1200 Watt Magnetic Drill Press 570RPM @ 1300N

Dayton Gear Head Drill Press, Floor Model, 20 In - 2VRR2 Review

If you are looking for a good product, the Dayton Gear Head Drill Press, Floor Model, 20 In - 2VRR2 is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Gear Head
• 536 pounds

Gear Head Drill Press, Floor Model, Swing 20 In, Motor HP 3/4 Or 1, Voltage 120, 11/13 Amps AC, Capacity Cast Iron 1 In, Capacity Steel (In) 3/4, Spindle Speeds 8, 130-3480 RPM, Spindle Taper MT3, Spindle Travel 5 5/16, Spindle to Table 35 5/8, Max Spindle To Base 50 In, Column Dia 4 In, Quill Dia 2 3/8, Table Work Surface 13 3/4x19 3/4 In, Table Slots 9/16 In, Overall Height 67 In, Overall Width 20 In, Overall Depth 20 In, Includes Drill Chuck Guard, Head And Table RaiserProduction-Duty Drill PressesFeature heavy, fine-grain cast-iron head, table, base, and column; steel rack and pinion table raising/lowering mechanism; industrial-duty motors; and positive adjustable front-mounted depth stop. Totally enclosed, permanently lubricated ball bearings for full spindle and quill support. Precision-ground table with coolant trough and 5/8" T-slots, and 3-spoke spindle feed handle. Large, dynamically balanced pulley on variable speed models delivers continuous, vibration-free operation with enhanced accuracy. Nos. 4YG14, and 1UH16 have LED spindle speed readout. No. 2VRR3 power feed gear box provides 3 feed rates: 0.003, 0.005, and 0.008" per revolution for automatic drilling and spindle stops feeding at predetermined depths. Nos. 3WRP1 and 3WRP2 have external #3 Morse Taper. No. 2VRR2 gear head drill has helical gears for smooth, quiet operation, and a 2-speed motor. Gear head design provides speed versatility, with low speed for large holes and high speed for small hole drilling.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Dayton Gear Head Drill Press, Floor Model, 20 In - 2VRR2

Heavy Duty 16 Speed Bench Drill Press 3/4 HP Chuck Capacity: 7/64 to 5/8 inch Review

If you are looking for a good product, the Heavy Duty 16 Speed Bench Drill Press 3/4 HP Chuck Capacity: 7/64 to 5/8 inch is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Chuck capacity: 7/64'' to 5/8''
• Sixteen spindle speeds from 220 to 3600 RPM
• Spindle stroke: 3-1/8''
• Spindle Taper: MT2
• Motor HP: 3/4

Machined steel column features rack and pinion table movement. Cast iron table is accurately gauged, tilts to 45° left or right. Precision chuck holds bit from the smallest wire gauge to the largest size with 5/8'' shank. Morse taper spindle for versatility. Adjustable depth stop and gauge included. Table and base are slotted for easy vise installation.

Motor HP: 3/4
Column diameter: 2-57/64''
Table size: 11-1/2'' diameter
Swing: 13-7/8''
Base size: 17-5/8'' x 10''
Height: 41-3/4''
Weight: 107.65 lbs.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Heavy Duty 16 Speed Bench Drill Press 3/4 HP Chuck Capacity: 7/64 to 5/8 inch

Air Tank 9 Gallon Review

If you are looking for a good product, the Air Tank 9 Gallon is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

9 Gallon Air Tank

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Air Tank 9 Gallon

5 Speed Drill Press Jeweler Hobby Table Bench 3070 RPM Review

If you are looking for a good product, the 5 Speed Drill Press Jeweler Hobby Table Bench 3070 RPM is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• 5 Speed Drill Press; 5 speed: 760 RPM, 1150 RPM, 1630 RPM, 2180 RPM, 3070 RPM
• Motor: 120V, 60Hz @ 2.4 AMP; HP: 0.4
• Chuck Size: 1/2";Chuck Shaft: 1/2"
• Spindle Speed: 760 - 3070 RPM;Spindle Stroke: 2"; Spindle Taper: MT2
• Quantity: 1

Other features include:
Table Adjustable: ±45º and 360º Rotation.~~
Overall dimension: 8" x 15-1/2"W x 22"H

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

5 Speed Drill Press Jeweler Hobby Table Bench 3070 RPM

Amico 10" Drill Press Quill Feed Return Coil Spring Assembly 2" Review

If you are looking for a good product, the Amico 10" Drill Press Quill Feed Return Coil Spring Assembly 2" is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Product Name : Drill Press Spring;Fit for : 10" Drill Presses
• Total Size : 5 x 1.2cm / 2" x 0.47"(Max.D*T);Color : See the Picture
• Material : Metal
• Net Weight : 95g
• Package Content : 1 x Drill Press Spring

The drill press quill return spring is good replacement for many existing quill spring on 10" drill presses, this is the chrome housed spring that returns the quill to the top after you have completed drilling. Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, safety belt coil spring.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Amico 10" Drill Press Quill Feed Return Coil Spring Assembly 2"

Hougen Portable Magnetic Drill 2-3/8" HMD505 Review

If you are looking for a good product, the Hougen Portable Magnetic Drill 2-3/8" HMD505 is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

Hougen Quill feed design eliminates gib adjustments and arbor support brackets/spacer for maintenance free operation and fast, smooth feed. LED feed rate indicator helps obtain optimum cuting efficiency and long tool life. Optional pressurized coolant system aids drilling in horizontal positions and feed handles can be switched to either side without tools. RPM 250 & 450. Two-Speed 15 Amp Motor. Hole capacity - 7/16" to 2-3/8" diameter, 3" depth. Uses 12,000 Series Cutters.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Hougen Portable Magnetic Drill 2-3/8" HMD505

The Hillman Group 385390 WallDog Self-Drilling Pan Head Phillips 3/16-Inch by 1-1/4-Inch, Chrome Review

If you are looking for a good product, the The Hillman Group 385390 WallDog Self-Drilling Pan Head Phillips 3/16-Inch by 1-1/4-Inch, Chrome is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Screw and anchor in one
• Easily penetrate wood and metal studs
• Holds up to 50-Pound (1/2-Inch drywall), 175-Pound (4000 psi concrete), 95-Pound (brick)
• Chrome finish
• 75 pieces per pack

The WallDog pan head phillips screw easily penetrates wood and drywall with no predrilling.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

The Hillman Group 385390 WallDog Self-Drilling Pan Head Phillips 3/16-Inch by 1-1/4-Inch, Chrome

Jancy USA-101 Portable Magnetic-Base Drill, 240V, 5.7 Amp Motor, 1-1/2" Diameter x 2" Depth Capacity Review

If you are looking for a good product, the Jancy USA-101 Portable Magnetic-Base Drill, 240V, 5.7 Amp Motor, 1-1/2" Diameter x 2" Depth Capacity is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• 240V, 5.7 amp magnetic-base drill press with 1.75 horsepower (HP) 1380 watt single-phase motor weighs 29 lb.
• 1-1/2" maximum cutting diameter and 2" maximum cutting depth
• 1480 lb. magnet dead lift and 650 lb. drill point breakaway on 1" thick steel
• Compact dimensions, for fabricating in confined spaces
• Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments

The Jancy USA-101 240V, 5.7 amp portable magnetic-base drill press is a good choice for fabricating in confined spaces, has a 1-1/2” maximum cutting diameter, a 2” maximum cutting depth, an internal chamber that delivers coolant through the arbor, and an electromagnet with a dead lift of 1480 lb. and a drill point breakaway of 650 lb. on 1” thick steel when drilling holes 1-1/16” diameter and larger. Safety features prevent the drill from turning on if the magnetic field is not strong enough to hold the drill, and turn on a warning light when the magnetic field drops to an unsafe level. A safety strap is designed to prevent the drill from falling if power to the magnet is interrupted, and a chip guard controls chips. For customization, a 3-spoke handle can be mounted on either side of the press. The drill press accommodates annular cutters with a 3/4" shank, and can be converted to hold a 1/2” capacity drill chuck (all sold separately).

The Jancy USA-101 240V portable magnetic-base drill has a 1.75 horsepower (HP) 1380 watt single-phase motor. The drill is 17-3/4 x 8 x 13-1/2 inches (H x W x D) and it weighs 29 lb. (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)

Magnetic drill presses are used in steel fabrication industries to drill holes in steel where it is necessary to move the drill to the workpiece, such as ship and bridge building. They are portable and have a magnetic base that secures the drill to the steel workpiece, allowing the drill to be mounted vertically, from either the top or bottom of the workpiece, or horizontally on the side of the workpiece. They are usually used with annular cutters, though some can be converted to hold a chuck with drill bits or with threading taps. Magnetic drill presses are given two numbers that signify the strength of the magnetic field. Magnet deadlift signifies the amount of force it takes to lift the drill off 1” thick steel when the magnet is turned on. Drill point breakaway is the amount of force it takes the drill bit to push the drill off 1” thick steel when the drill is in operation. Generally, higher numbers indicate that the press can exert more force on the workpiece.

Jancy Engineering manufactures Slugger portable magnetic drills and annular cutters, as well as metal working equipment for the fabrication trade. The company, founded in 1957 and headquartered in Davenport, IA, makes tools that meet American National Standards Institute (ANSI) standards.

What’s in the Box?

• Jancy USA-101 240V magnetic drill press
• Carrying case
• Safety strap
• Handle with 3 spokes
• 3/16” pilot pins: 1” and 2” depths of cut
• 1/4” pilot pins: 1” and 2” depths of cut
• Hardware
• Hex keys: 3, 4, and 5 mm
• 5 mm T-handle wrench
• 10 mm combination wrench
• Instructional DVD
• Instructions

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Jancy USA-101 Portable Magnetic-Base Drill, 240V, 5.7 Amp Motor, 1-1/2" Diameter x 2" Depth Capacity

JET 354210/JDP-20EVS(230V) 20-Inch Electronic Variable Speed Drill Press Review

If you are looking for a good product, the JET 354210/JDP-20EVS(230V) 20-Inch Electronic Variable Speed Drill Press is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• 2HP, 3Ph, 230V motor
• Tapping and reversing controls
• Complete coolant system
• Variable spindle speeds with a range of 65-2000 RPM

354210 Features: -Capacity drill.-20" Electronic variable speed drill presses.-Runs quieter and smoother than a conventional variable speed head.-Low maintenance head has less moving parts.-Incorporates a high-low gear box to maintain low speed torque.-Chrome molybdenum gears are hardened, ground, and shaved.-Quiet running and longer life.-Speed can be adjusted in each range during operation.-LED spindle RPM readout is conveniently mounted.-Spindle speeds: Variable.-Motor phase: 3 PH.-Motor voltage: 230.-Range of spindle speeds: 65 to 2000 RPM.-Spindle taper: 3 meter. Specifications: -Model number: JDP-20EVS-230.-230V model can run on single phase power.-Motor power: 2 HP. Dimensions: -Quill dimensions: 2.44" W x 2.44" D.-Overall dimensions: 73" H x 39" W x 25" D. Warranty: -Manufacturer provides 2 years warranty.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

JET 354210/JDP-20EVS(230V) 20-Inch Electronic Variable Speed Drill Press

JET 354026/GHD-20PFT 20-Inch Geared Head Drilling & Tapping Press with Powerfeed Review

If you are looking for a good product, the JET 354026/GHD-20PFT 20-Inch Geared Head Drilling & Tapping Press with Powerfeed is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• 2HP, 3Ph, 2 speed 230V motor
• Tapping and reversing controls
• 3 power down feeds
• 12 spindle speeds with a range of 60-3000 RPM
• T-slotted worktable

The JET 20in. Geared Head Drilling & Tapping Press is built with a heavy-duty design that allows a variety of precision drilling and tapping applications. This drill press is designed to last and provides the user with enhanced flexibility. Ideal for both a commercial or maintenance shop. Speeds (qty.): 12, Max. Spindle Distance (in.): 30 1/2, Stand Included: Yes, Speed (RPM): 120, 260, 460, 900, 1,600, 3,000, 60, 130, 230, 450, 800, 1,500, Swing: 20in., HP: 2, Drilling Capacity (in.): 1 1/2, Volts: 230 3-phase, Worktable L x W (in.): 15 1/4 x 13, Dimensions L x W x H (in.): 32 x 24 x 71

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

JET 354026/GHD-20PFT 20-Inch Geared Head Drilling & Tapping Press with Powerfeed

Hougen Portable Magnetic Drill 2-1/16" HMD914 Review

If you are looking for a good product, the Hougen Portable Magnetic Drill 2-1/16" HMD914 is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

Hougen They are equipped with a 16oz gravity feed coolant bottle, reverseable feed handles, and all Hougen safety features including the no adjustment safety switch. These models have the power to drill a 2-1/16" dia. hole up to 3" deep, without bogging down. Use 12,000 Series Rotabroach Cutters

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Hougen Portable Magnetic Drill 2-1/16" HMD914

Central Machinery Mortising Machine Review

If you are looking for a good product, the Central Machinery Mortising Machine is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Make 1/4", 3/8", and 1/2" square cuts
• Large capacity - handles pieces up to 5" high
• Fence with hold-down clamp keeps workpieces from lifting off the table
• Accepts 0.745" chisel shanks
• Maximum speed: 3580 RPM;

Drill a square hole in the fraction of the time it takes by hand Use this mortising machine to drill a square hole - Visit Harbor Freight Tools For More Information.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Central Machinery Mortising Machine

Unibor EQ50 Diameter Annular Cutter Magnetic Drill, 7/16-Inch by 2-Inch Review

If you are looking for a good product, the Unibor EQ50 Diameter Annular Cutter Magnetic Drill, 7/16-Inch by 2-Inch is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Magnet dimensions 7-1/8-Inch x 4-Inch x 2-3/8-Inch. Magnet adhesion is 2000 lbs.
• Annular cutter capacity is up to 2-Inch in diameter.
• Motor comes with reverse for possible tapping applications.
• Change cutters in less than 10 seconds with the QuickHitch arbor system.
• With carrying case, safety strap, coolant system, and coolant.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Unibor EQ50 Diameter Annular Cutter Magnetic Drill, 7/16-Inch by 2-Inch

Northern Industrial Tools Floor Drill Press - 16-Speed, 1 HP Review

If you are looking for a good product, the Northern Industrial Tools Floor Drill Press - 16-Speed, 1 HP is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Depth lock
• Spindle taper: MT-2
• Screwdriver handle
• 17 15/16in. x 10 5/8in. base

Powerful, efficient and smooth operation in one powerful machine. Dimensions L x W x H (in.): 15 x 25 1/3 x 63 1/3, Speed (RPM): 240-3,200, Swing: 15 in., Light Included: Yes (no bulb), Speeds (qty.): 16, Chuck Size (in.): 5/8, Worktable L x W (in.): 12 x 12, Vertical Stroke: 3 11/64in., HP: 1, Drilling Capacity (in.): 3/4, Volts: 120

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Northern Industrial Tools Floor Drill Press - 16-Speed, 1 HP

Annular Cutter & Magnetic Drill Accessories - Unibor &lt;font size=1&gt;(Coolant / Arbors / Drill Chucks) &lt;/font size=1&gt; Model No.: UP 001, 3/4" Milling Machine Adapter 3/4" Weldon Shank Review

If you are looking for a good product, the Annular Cutter & Magnetic Drill Accessories - Unibor <font size=1>(Coolant / Arbors / Drill Chucks) </font size=1> Model No.: UP 001, 3/4" Milling Machine Adapter 3/4" Weldon Shank is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

UNIBOR Portable Magnetic Drills

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Annular Cutter & Magnetic Drill Accessories - Unibor <font size=1>(Coolant / Arbors / Drill Chucks) </font size=1> Model No.: UP 001, 3/4" Milling Machine Adapter 3/4" Weldon Shank

Dayton 5phc2 Floor Drill Press,15 In,1/2hp,120/240 Review

If you are looking for a good product, the Dayton 5phc2 Floor Drill Press,15 In,1/2hp,120/240 is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Floor Drill Press
• Belt Drive
• Swing (In.) 15
• Motor HP 1/2
• Phase Single

Floor Drill Press, Belt Drive, Swing (In.) 15, Motor HP 1/2, Phase Single, Voltage 120/240, Hz 60, Amps AC 8.6 / 4.3, Capacity Cast Iron (In.) 5/8, Capacity Steel (In.) NA, Spindle Speed (RPM) 144 to 3615, Number of Speeds 16, Chuck Size (In.) 5/8, Spindle Taper MT2, Spindle Travel (In.) 5, Overall Height (In.) 66-1/2, Overall Width (In.) 27-1/4, Overall Depth (In.) 15-1/2

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Dayton 5phc2 Floor Drill Press,15 In,1/2hp,120/240

Unibor EQ100 Diameter Annular Cutter Magnetic Drill, 7/16-Inch by 4-Inch Review

If you are looking for a good product, the Unibor EQ100 Diameter Annular Cutter Magnetic Drill, 7/16-Inch by 4-Inch is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Magnet dimensions 7-1/2-Inch x 4-Inch x 2-1/2-Inch. Magnet adhesion is 4000 lbs.
• Annular cutter capacity is up to 4-Inch in diameter.
• Variable Speed control in two gear ranges
• Change cutters in less than 10 seconds with the QuickHitch arbor system.
• With carrying case, safety strap, coolant system, and coolant.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Unibor EQ100 Diameter Annular Cutter Magnetic Drill, 7/16-Inch by 4-Inch

Drill Press Dust Collector Rectangle Nozzle By Peachtree Woodworking PW347 Review

If you are looking for a good product, the Drill Press Dust Collector Rectangle Nozzle By Peachtree Woodworking PW347 is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Rectangle Nozzle for Drill Press Dust Collector Kit
• Dust Collector Kit SOLD SEPARATELY

This additional nozzle for you Drill Press Dust Collector Kit (KIT SOLD SEPARATELY) is a must have for sanding with your drill press drum sander or any other sanding or drilling. Just place the nozzle at your work area on your drill press. This will keep your work area clean and increase your visibility.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Drill Press Dust Collector Rectangle Nozzle By Peachtree Woodworking PW347

Ridgid 76657 3/4" Jaw for Standard Series ProPress Pressing Tool Review

If you are looking for a good product, the Ridgid 76657 3/4" Jaw for Standard Series ProPress Pressing Tool is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• Designed in conjunction with the ProPress System
• Compatible only with Ridgid Standard Series pressing tools (RP330-B, RP330-C, CT400, 320-E - all sold separately)
• Backed by full Ridgid Lifetime Warranty

Ridgid 76652 3/4" Standard Series Jaws for ProPress System is for use with standard series press tools (RP 330-B, RP 330-C, CT400, 320-E). Jaws for ProPress are designed in conjunction with the ProPress System Fittings, ensuring total system compatibility. Compatible only with Ridgid Standard Series Pressing Tools. Backed by full Ridgid Lifetime Warranty.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Ridgid 76657 3/4" Jaw for Standard Series ProPress Pressing Tool

Milwaukee 4202 Fixed Position Electromagnetic Drill Press, Base Only Review

If you are looking for a good product, the Milwaukee 4202 Fixed Position Electromagnetic Drill Press, Base Only is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• 120 Volt AC only, 12.5 amp max. rating
• 9 inch drill travel
• Fixed position, variable speed base
• For use on any flat ferrous material, 1/2 inch and thicker
• Limited warranty, 30-day no-risk trial

Fixed Position Electromagnetic Drill Press Base This 4202 electromagnetic variable speed base features solid state electronic switching and a 9" drill travel. Feedback speed control maintains speed and a motor/magnet lockout prevents de-mag during operation. For use on any flat ferrous material, 1/2" and thicker. Features: 15" High x 11" Long 12.5 AMPs 9' Cord Included Feedback Control 9" Drill Travel 120 AC Volts Since its founding in 1924, Milwaukee has focused on a single vision: To produce the best heavy-duty electric power tools and accessories available to the professional user. Today, the Milwaukee name stands for the highest quality, durable and reliable professional tools money can buy.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Milwaukee 4202 Fixed Position Electromagnetic Drill Press, Base Only

Northern Industrial Cross Slide Drill Press Vise - 4in. Review

If you are looking for a good product, the Northern Industrial Cross Slide Drill Press Vise - 4in. is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

Heavy-duty cast iron cross slide vise has replaceable serrated 4in. jaws that open to 3 1/4in. Two swivel crank handles adjust both forward and sideways for versatile clamping and precise drilling capabilities. Set screws hold positioning tightly for drilling. Longitudinal movement of 6in. with cross travel of 4in. Vise is secured to drill press by 3 slots on 2 sides and 1 slot on one end. Longitudinal Travel (in.): 6, Jaw Capacity (in.): 3 1/4, Material: Heavy duty cast iron, Jaw Length (in.): 3, Handles (qty.): 2, Mount Type: (3) Slots on 2 sides, (1) Slot on one end

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Northern Industrial Cross Slide Drill Press Vise - 4in.

Genesis GDP1012A 10-Inch 12-Speed Drill Press Review

If you are looking for a good product, the Genesis GDP1012A 10-Inch 12-Speed Drill Press is worth every penny. Overall, most of the customers are happy with this product and highly recommend it to everyone.

• 3.85 Amp Induction Motor for Quiet, Smooth Performance
• 12-Speed Gear Box (300-2900 RPM) for Versatility
• 5/8" Chuck Handles Large Bits
• Easy to Use Rack-and-Pinion Table Height Adjustment
• Includes: Chuck Key, Allen Wrenches and Chuck Release Key

The Genesis GDP1012A 10" Drill Press combines benchtop convenience with the features of much larger drill presses. It is powered by a 3.85 Amp induction motor for quiet, smooth performance. A 12-Speed gear box (300-2900 RPM) gives you versatility when using different bits and materials. The table rotates 360 degrees and tilts 0-45 degrees, with an easy to use rack-and-pinion height adjustment for quick and easy set up. A 5/8 in. chuck handles larger bits and the heavy cast iron base provides stability.

What shipping and processing options are available? for more details, please follow the link below and find the best deal for you.

Genesis GDP1012A 10-Inch 12-Speed Drill Press